Track Lighting Heads | Lithonia Lighting
Our adjustable LED track head transforms accent lighting in retail displays, gallery walls, and kitchen workspaces. The gimbal design rotates 350° horizontally and tilts 90° vertically so you can direct light exactly where you need it. We built this head with a die-cast aluminum housing that dissipates heat efficiently while the integrated LED delivers 800 lumens at 3000K — warm white output that renders colors accurately without the yellow cast of older halogen fixtures. The head snaps into standard H-type track and locks securely with a single quarter-turn, no tools required.
Every lithonia lighting track head in our catalog ships with precision-engineered optics matched to its intended application. The standard LED track head uses a 40° medium flood reflector that balances coverage and intensity — this beam spread works for general accent lighting where you’re illuminating a 3-foot-wide display from 6 to 8 feet away. The cylinder head narrows the beam to 25° for tighter spot effects on small objects or vertical surfaces. For installations requiring both spot and flood, you can mix head types on the same track run since we calibrate all our 3000K fixtures to the same color point within a 2-step MacAdam ellipse.
Track system compatibility and installation
Our track heads mount to industry-standard H-type track using a tool-free adapter that snaps into the track channel and twists 90° to lock. The adapter makes electrical contact through spring-loaded copper fingers that grip the track conductors — you’ll feel a firm click when the head seats properly. We also offer optional adapters for J-type and L-type track systems used in older installations, so you can upgrade to LED heads without replacing the entire track infrastructure.
For new installations, we recommend pairing these heads with our complete track systems that include matching track sections, connectors, and power feeds calibrated for the combined wattage load. A standard 8-foot track run can support up to six LED track heads before you need a separate circuit, though we suggest limiting runs to four heads for easier beam pattern control. The track itself mounts to junction boxes or directly to ceiling joists using the included clips — a single installer can hang and wire a 12-foot run in under an hour.
LED performance and color consistency
We bin every LED used in our track heads to ensure color consistency across production batches. A lithonia lighting track head purchased today will match the color temperature and CRI of a head you installed two years ago, assuming you ordered the same CCT specification. This binning discipline matters in commercial spaces where clients notice even small color shifts between fixtures — a gallery owner replacing a single failed head shouldn’t see a yellow-versus-blue mismatch on the wall.
The integrated LED arrays in these heads maintain 90% of initial lumen output at 50,000 hours based on LM-80 testing. That’s 11 years of continuous operation or 22 years at 12 hours per day before you’d notice dimming. We achieve this longevity through thermal management: the die-cast aluminum housings conduct heat away from the LED junction, keeping operating temperature below the 85°C threshold where rapid lumen depreciation begins. The separate driver compartment isolates heat-sensitive electronics from the LED heat sink, and the driver itself carries a separate 5-year warranty beyond the standard fixture coverage.
Technical specifications & performance
Complete your track lighting system
Customer reviews
Common questions about our track heads
The number of track heads per circuit depends on the wattage of each head and your circuit capacity. On a standard 15-amp residential circuit, you can typically install 12 to 15 LED track heads since each draws 12 to 15 watts. For commercial installations with 20-amp circuits, you can support up to 20 heads. We recommend calculating total wattage and leaving 20% headroom below the circuit breaker rating. If you’re using dimming controls, verify the dimmer is rated for the combined LED load.
Yes, you can mix cylinder, square, and standard track heads on the same run as long as they share the same color temperature specification. All our 3000K heads match within a 2-step MacAdam ellipse so you won’t see color shifts between different head styles. Mixing beam angles like 25-degree spot with 40-degree flood is common in gallery and retail settings where you need both accent and fill lighting. Just confirm all heads use the same track adapter type for your system.
Our track heads fit industry-standard H-type track systems from most manufacturers including Halo, Juno, and WAC Lighting. The adapter uses the same three-contact configuration found in these systems. For J-type and L-type track used in older installations, we offer separate adapters that let you mount our LED heads without replacing the track infrastructure. If you’re unsure about compatibility, check whether your existing track has three metal conductors in the channel — that indicates H-type compatibility.
For residential kitchens, living rooms, and hospitality spaces, 3000K warm white creates an inviting atmosphere similar to incandescent lighting. Retail clothing and galleries often use 3000K or 3500K for accurate color rendering without the yellow cast. Office corridors and commercial workspaces typically use 4000K neutral white for a crisp, alert environment. Our 90+ CRI rating ensures accurate color appearance across all color temperatures. You can request color samples if you’re unsure which temperature suits your space.
For uniform wall washing, position track heads 24 to 36 inches from the wall and space them 3 to 4 feet apart along the run. Aim each head at a 30-degree angle toward the wall so the beam centers about two-thirds of the way up from the floor. Use heads with 40-degree or wider beam angles for wall washing applications — narrower spot beams create scalloping patterns instead of even coverage. Start at full brightness and adjust dimming after positioning to fine-tune the illumination level.
Yes, the track system can be mounted on sloped ceilings up to 45 degrees from horizontal. The track heads themselves adjust independently of the track angle thanks to the gimbal and yoke mechanisms, so you can still aim the beam straight down or at any desired angle even when the track runs on a slope. For vaulted ceilings, mount the track parallel to the slope and tilt each head to compensate. The friction locks hold position regardless of the mounting angle.
We provide a 5-year warranty covering the LED module, driver electronics, and mechanical components including the gimbal and track adapter. The warranty covers defects in materials and workmanship under normal use. LED lumen maintenance is guaranteed to 90% of initial output at 50,000 hours based on LM-80 testing. Damage from improper installation, overvoltage, or physical impact is not covered. Register your fixtures within 60 days of installation to activate the full warranty term.